1-Inch Slurry Pump (1.5x1)
HD-1000 (1.5" Suction by 1" Discharge) Closed Coupled 1-inch EDDY Slurry Pump - Heavy Duty Line Sales QuoteThe 1-Inch commercial line slurry pump by EDDY Pump. Our industrial pumps are non-clog pumps designed for high solids pumping applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in a variety of the most difficult pumping applications.
All EDDY Pumps can be mounted vertical or horizontal.
In harsh conditions with sand, sludge, rocks, slurry, normal dredge pumps clog, wear and fail more often. This leads to downtime for maintenance, hurting your bottom line. This is not the case with EDDY Pumps since we have the tolerance to pump objects up to 12 inches!
The EDDY Pump’s open rotor design with high tolerances allow anything that will go into the intake to be passed through the discharge without issues. Tolerance between the rotor and the volute in the 4″ EDDY Pump easily allows the passage of a man’s arm, while the tolerance in a centrifugal pump is significantly less. In a 1-inch to 12-inch EDDY Pump the tolerance ranges from 1-12 inches.
This translates to a significant amount of solids and debris pass through, without clogging the pump. To learn more about the technology behind our pumps continuereading more HERE.
The Best Non-Clog and High Solids Industrial Pump on the Market. Since 1984.
Best Applications: If you are pumping high solids, slurry, extremely viscous material, high abrasives (sand & gravel) and material filled with solids then you found the ideal pump for your job.
Industries Most Served: Mining, Oil and Fracking, Waste Water, Paper/Pulp, Chemical, Energy, Water Districts, Irrigation Districts and Dredging Companies.
EDDY Pump Deployment Options
Flooded Suction Pumps
With flooded suction pumps, the fluid to be pumped is positioned above the pump. With the pump positioned below, gravity can feed the fluid into the suction of the pump and keep the pump primed.
Submersible Pumps
Pumps that are completely submerged in the liquid are called submersible pumps. By being submerged in the fluid to be pumped, there is no need for priming the pump.
Self-Priming Pumps
With a self-priming unit, the pump and power unit are not submerged. The suction hose goes into the slurry and the unit acts like a super-sized wet dry vacuum. Can be trailer mounted for added mobility.
Questions? Call Us: 619-258-7020
Tell us about your project. See the custom pump curve page and we can start the first step of a quote to determine if your project is a fit for our equipment. Contact Us Here
Features and Benefits
1-Inch Pumps (1.5×1)
1-inch EDDY Pump Advantages
- Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design
- 40-70% Solids Pumping by Volume
- Ability to pump objects of up to .75-inches in diameter
- 100% American Built
- State-of-the-Art Research and Development Facilities on site
Options
- Vertical / Horizontal Mounting
- Submersible / Immersible
- Electric / Hydraulic
- Various Metals Available
- Variable Speed Control
- Self-Priming
- Trailer / Skid Mounted
- Bearing House / Close-Coupled
- Automated Controls
Pump Benefits
- Ideal for Process, Slurry Applications
- Open Rotor For Lowest Wear Possible
- Lower Total Lifecycle Cost
- No Critical Tolerances
- Low Maintenance
- Minimal Downtime
HD-1000 Submersible Weights & Dimensions
Standard Submersible Motor, 5 HP. Custom Sizes available.
HD-1000 TEFC Electric Weights & Dimensions
Standard TEFC Motors, COMING SOON. Custom Sizes available.
Sales Quote With Custom Pump Curve
Do you know specifics about your project? Let us know and we can create your own personalized pump curve.